| Choose DECO as your caster wheels supplier, call us at:1-800-451-0030 or 305-888-3700 How to select the right caster ? 1. What is the average load and the maximum load? The heavier the load the larger the wheel required for the caster. The weight of the load also influences the mobility of the wheel. Roller or ball bearings are recommended for loads over 400 pounds. 2. What wheel type is needed for floor protection? Make sure the wheel you select is large enough to pass over cracks in the floor, tracks moldings and other obstructions. Select particular wheel for linoleum, tile, carpet, etc. 3. In what type of environment will the casters or wheels operate? Each wheel material has certain characteristics which will give the best results where unusual conditions exist. |
 |
 |
 |
 |
 |
|
For
1-8 Series Casters.
Grey or black non-marking thermoplastic elastometer tread bonded to poleolefin core. Polyolefin core is ribbed for added strength on 3-7 Series wheels. |
|
4-5
Series Wheels
Round or flat black non-marking thermoplastic elastomer tread bonded to ribbed polyolefin core. |
|
For
2-6 Series Casters.
Grey non-marking thermoplastic elastometer tread bonded to polyolefin core. Polyolefin core is ribbed for added strength on 5 Series wheels. |
|
For
2-6 Series Casters.
Grey non-marking conductive thermoplastic elastometer tread bonded to polyolefin core. Polyolefin core is ribbed for added strength on 3-5 Series wheels. |
|
 |
 |
 |
 |
 |
|
For
5-8 Series Casters.
Cushion rubber tread bonded to cast aluminum core. |
|
For
Pneumatic Casters.
Rubber tread with separate inner tube mounted on heavy gauge steel wheel discs. |
|
For
1 -2 Series Casters.
(From left to right) 2 Series rubber HI-TECH bonded to polyolefin, 1 Series hard or soft rubber, and 1 Series General Duty TPR rubber. |
| For
4-8 Series Casters. Polyurethane tread bonded to cast aluminum core. |
|
For
4-8 Series Casters.
Cushion rubber tread bonded to cast iron core. |
|
 |
 |
 |
 |
 |
 |
|
For
4-6 Series Casters.
Special solid elastomer material allows easier rolling under under heavy loads. |
|
For
1-8 Series Casters.
Red polyurethane tread mechanically locked to polyolefin core. Polyolefin core is ribbed for added strength on 3-7 series wheels. |
|
For
2-3 Series Casters.
Red polyurethane tread held in place by two steel discs riveted together. |
|
For
4-8 Series Casters.
Polyurethane tread bonded to cast iron core. |
|
For
4-6 Series Casters.
Nylon tread bonded to aluminum core. |
|
For
3-6 Series Casters.
Exclusive ultra tough thermoplastic resists hard impacts and drop-shocks. |
|
 |
 |
 |
 |
 |
|
For 2-6 Series Casters. Handle extreme temperatures even under heavy loads. |
|
For
2-8 Series Casters.
High grade cast iron steel. |
|
For
1-6 Series Casters.
Durable polyolefin wheels. Polyolefin is ribbed for added strength on 3-5 series wheels. |
|
For
2-8 Series Casters.
Molded macerated fabric filled with phenolic resin plastic. |
|
For
4-8 Series Casters.
Dropped forged heavy duty wheels. |
