|
| 
Glass Cutting Table Caster
14mm x 1-3/4 long stem
Special Order--about a week
Diameter
| Capacity
| Overall
Height
| Swivel Radius
(L-R)
| Part
Number
|
| 35 mm ( 1-3/8")
| 33 lbs.
| 1-13/16"
| 0.8"
| 35-RH/LH
|
| 50 mm (1-31/32")
| 44 lbs.
| 2-17/32"
| 0.8"
| 50-RH/LH
|
| Black spherical rubber wheel. Used in the glass industry in large fields to facilitate the movement of large sheets of glass. RH casters are biased toward the right, LH casters are biased toward the left. Typically sold in equal quantities and positioned in fields so that plates would be inclined toward the center. |
| Spring Loaded Door Caster
|
| Model
| Wheel
Diameter
| Plate
Size
| Bolt
Spacing
| Capacity
lbs.
|
| LC-2
| 2"
| 1" x 3-3/8"
| 2-1/8" Ǿ
| 75
|
| DC-2
| 2"
| 2" x 5-1/8"
| 1¼" x 3"
| 75
|
| LC-3
| 3"
| 1" x 3-3/8"
| 2-1/8" Ǿ
| 100
|
| DC-3
| 3"
| 2" x 5-1/8"
| 1¼" x 3"
| 125
|
Material must be ordered from factory.
LC-2 and LC-3 use a 25-pound compression spring;
DC-2 and DC-3 use a 100-pound spring. |
|
Gravity Lock Ladder Caster
Used on certain models of warehouse rolling safety ladders
Overall stem length is 4-13/16"
9/16" diameter plain first 1-3/4"
Shouldered to 5/16" plain for next 2-3/8"
Threaded 5/16 - 18 last 5/8"
Provided with spring that fits over 5/16" plain section
Provided with locknut |
|
Concealed Side Mount Caster
Equipment or furniture rides ½" above floor
fasten to side of equipment with # 8 wood screws
2" black plainbore polyolefin wheel
1¼" X 2¼" plate at top, undrilled
9/16" deep x 2¾" long plate measured from side,
2 ea. .180" holes, 1-5/16" up, 1-13/16" apart |
These dual wheel Casters are used in applications where heavy load capacity, low overall height and floor or carpet protection is required. Ideal for computers and electronic equipment. Standard finish is Bright Zinc. Double ball bearing raceways. All wearing parts are heat treated.
| Diameter
| Tread Width
Each Wheel
| Load Capacity
| Wheel Material
| Bearing
| Swivel Part Number
| Weight Ea
| Overall Height
| Swivel Radius |
| 2"
| 7/8"
| 250
| Round Donut Neoprene
| Ball
| DE20-XDN-RD
| 2
| 3-1/4"
| 2-1/4"
|
| Neoprene Rubber*
| DE20-XDN
|
| Hard Rubber *
| DE20-XH
|
| 300
| Hi-Cap Neoprene
| DE20-XKN
|
| 400
| Advanced Elastomer*
| DE20-XAE
|
| * Limited Quantities in STOCK / Else 10 Days - 2 weeks |
|
|
| Carbon Steel Ball Transfers
1" ball of steel or nylon rolls omnidirectionally
1-1/2" ball in stock in steel ball only
Use ball-up on air cargo transfer tables
Ball down on light furniture provides ultra-low overall height
1" ball: Two-hole flange mount, 2" at widest point, 2-3/4" long; Holes 2-3/16" apart; 1-3/16" OAH
1-1/2" ball: four-hole 3" square mounting plate 2-15/32" x 2-15/32" mounting holes 1-13/16" OAH
Stainless and threaded mount also available as special orders |
|
High Capacity Low Overall Height Extrathane Caster
European caster combines ultra-low overall height with a capacity typical of casters two and a half times its size
Overall height 52mm (~2.04")
220# capacity
35mm x 27mm (~1-3/8" x 1-1/16") brown polyurethane on steel center wheel, with precision ball bearing
60mm x 60mm (~2-3/8" x 2-3/8") overall top plate size
38mm x 38mm (~1-1/2" x 1-1/2") boltholes slotted to 48mm x 48mm (~1-29/32" x 1-29/32") for 6mm or smaller fastening
Limited quantities in stock |
|
